Hospital Vacuum System Medical Suction System for Ward
System Introduction
The system is based on the vacuum pump unit of the center suction station as the vacuum pressure source. Through the suction of the vacuum pump, the suction pipe reaches the required negative pressure value, and generates suction in the operating room, emergency room, treatment room and the terminal of each ward. It is mainly used to remove sputum, blood, pus and other pollutants from the patient's body.
The system assembled by Europe vacuum pump and medical gas bacteria filter, with stable vacuum degree, low noise and no pollution. The whole system could be started and stopped by manually and automatically, fault alarm timely and comprehensively, and realized signal remote transmission (optional)
Technical Parameters
Flow Rate
|
4-1300m3/h (per pump)
|
Vacuum Range
|
0.5-500mbar (absolute pressure)
|
Suction Volume
|
25-630m3/h
|
Motor Power
|
0.75-20KW
|
Terminal Negative Pressure Value
|
adjustable within the range of 0.02mpa-0.07mpa
|
Terminal Suction Rate
|
≥30L/min
|
System Leakage Rate per Hour
|
≤1%
|
System Features
High vacuum, stable performance and long service life